Premium Solar controls

by Denryo

Solar Amp B

J2 LED Lighting, LLC introduces to the USA the Denryo SA-BA10 solar charge controller intended for solar powered LED lighting applications. The SA-BA10 is a Japanese engineered controller with sophisticated battery charge control ability in a simple to use lightweight and robust module.

The SA-BA10 is rated at 10 amps maximum solar panel current for a 12 volt DC system. The controller can typically support up to a 170 watt solar panel or two 85 watt panels parallel wired provided either configuration does not exceed 10 amps total per panel ratings for maximum current.

The controller has 5 LED status indicator lights: 1) charge indicator (green), 2) battery over voltage (red), 3) current over load (red), 4) controller high temperature (yellow), 5) and battery low voltage (yellow). The status indicator lights are under a translucent smoke black high strength polycarbonate plastic cover with silk screen icons for the given status functions.


  • LED Lighting of out buildings and sheds

     

  • Portable solar panel LED lighting systems

     

  • Charging of lead acid battery packs

     

  • Dock side and marine lights.

     

  • Solar powered signage LED lights

     

    SA-BA10

    Denryo Solar Amp B SA-BA10 Solar Panel Controller

    Buying options start at $36.99

    (Click to change quantity)



    Solar Amp Mini

    J2 LED Lighting, LLC introduces to the USA the Denryo SA-MN05-8 Solar Amp Mini solar PV panel charge controller intended for solar powered LED lighting control applications. The SA-MN05-8 is a Japanese engineered controller with sophisticated battery charge and lighting control ability in a small robust module.

    The SA-MN05-8 is rated at 8.5 amps maximum solar panel current for a 12 volt DC system. The controller can typically support up to a 150 watt solar panel or two 75 watt panels parallel wired provided either configuration does not exceed 8.5 amps total per panel ratings for maximum current.

    The controller has four operating mode functions for LED lighting control: 1) night light off = load always on, 2) dusk to dawn = lighting load output on at night, 3) normal timer = night on time of 6, 8, 10, 12, or 14 hours, 4) rate timer = light load on for a percentage of night time. 40%, 50%, 70%, or 80%. Functions are programmed from the user interface front panel and the unit’s memory will store a program up to 2 years with no power to the unit. Light level sensing for lighting control is via solar panel voltage levels monitored by the controller.

  • Parking lot solar powered LED lights

     

  • Dock side and marine LED lights

     

  • Gazebo solar LED lighting

     

  • Golf course and pool side solar powered LED lighting.

     

  • Spec sheet: SolarMini.pdf

    Manual: SolarAmpMini.pdf

    SA-MN05-8

    Denryo Solar Amp Mini SA-MN05-8 Solar Panel

    Buying options start at $56.99

    (Click to change)